GENERAL PROVISIONS
All purchases of products and services made through the Website and directly from the company (hereinafter, the Purchase Contracts) by users accessing it (hereinafter, the Customers) are governed by the General Terms and Conditions as well as other provisions and operating instructions contained in the Website and product user manuals.
In case of conflict between the aforementioned provisions and operating instructions and the General Terms and Conditions, the latter shall prevail.

2. EXCEPTIONS
Any operation and/or payment condition granted to the Customer as an exception to the General Terms and Conditions shall be valid only if Diesse Srl has accepted such an exception in writing.

3. MODIFICATIONS
Diesse Srl may modify, at any time and without notice, the content of the General Terms and Conditions contained in this document.
Any modifications made shall take effect from the date of publication on the Website, as stated in the heading of the General Terms and Conditions.

4. PURCHASE PROCEDURE
The Customer can purchase products available on the Website and in the catalogs, which are detailed and described in the corresponding information sheets on the Website and in the catalogs, following the technical access procedures described therein.
The publication of products and services on the Website constitutes an invitation to the Customer to make a purchase proposal.
The order sent by the Customer constitutes a contractual proposal and implies full knowledge and unconditional acceptance of these General Terms and Conditions.
The correct receipt of the Customer's proposal is confirmed by Diesse Srl through an automatic response sent to the email address provided by the Customer.
The response is automatically generated by the system and only confirms the correct receipt of the proposal.
This confirmation message will indicate the 'Order Number,' which must be used in all subsequent communications with Diesse Srl.
Each order can be viewed by the Customer on the Website, in their personal area, immediately after submission.
Each Purchase Contract concluded between Diesse Srl and the Customer is deemed finalized upon acceptance of the order by Diesse Srl.
Diesse Srl has the right to accept or reject the order at its discretion, without the Customer being entitled to any claims or rights, including compensation, in the event of non-acceptance.
The acceptance by Diesse Srl is considered tacitly granted unless otherwise communicated to the Customer within 48 hours from order submission, via an email sent to the address provided by the Customer.
By submitting the order in accordance with the Website's operational instructions, the Customer declares that they have reviewed all information provided during the purchase process and fully accept the General Terms and Conditions and payment terms described below.

5. PRODUCT PRICES | DELIVERY COSTS | PRODUCT AVAILABILITY
Prices: All product prices clearly indicated on the Website or in the catalogs include VAT unless otherwise specified. They do not include any additional or different taxes, duties, or tariffs imposed by applicable regulations, such as import duties. If required, the Customer must arrange for customs clearance and pay any duties and taxes (other than VAT) due in the destination country.
Modifications: Prices and product availability listed on the Website and in the catalogs are subject to change at any time without notice. However, for orders currently being processed or accepted by Diesse Srl, the sales conditions in effect at the time the order was placed will apply.
Availability: The Website displays the availability of products for shipment. This availability is not updated in real-time, and due to multiple users accessing the Website simultaneously, the actual availability of specific products may vary significantly throughout the day.
Diesse Srl does not guarantee immediate fulfillment of product shipments marked as available on the Website and shall not be held liable for any delivery delays.
Delivery Delays: If the delivery time for an ordered product is delayed beyond the estimated delivery time indicated on the Website at the time of the order, Diesse Srl will promptly notify the Customer via email. Until the product is shipped by Diesse Srl, the Customer may cancel or modify the order only by following the specified procedures in their personal area.
Shipping Costs: The cost of each shipment, which may vary based on delivery and payment methods, destination country, and total order amount, will be added to the total purchase price and will be clearly indicated to the Customer before finalizing the Purchase Contract.
Product Images: The visual representation of products on the Website and in catalogs, where available, generally corresponds to the photographic image of the products themselves. However, Diesse Srl does not guarantee the exact match between the image displayed on the Website and the actual product, particularly regarding its dimensions and color aspects.

6. RIGHT OF WITHDRAWAL
The right of withdrawal is regulated by law if the consumer-customer (i.e., a natural person purchasing goods for purposes not related to their professional activity, without providing a VAT reference in the order form) has the right to withdraw from the purchase contract for any reason.
To exercise this right, the Customer must send a communication to Diesse Srl within 10 working days from the delivery date of the goods.
Note: Customers who purchase with a VAT number cannot exercise the right of withdrawal.
The right of withdrawal is subject to the following conditions:

  • The purchased item must be intact and returned in its original packaging, complete in all its parts (including packaging, documentation, and any accessories);
     
  • To minimize damage to the original packaging, it should be placed inside another box (avoid applying labels or adhesive tapes directly on the original product packaging);
     
  • The shipment is under the full responsibility of the customer until received at our warehouse;
     
  • The cost of returning the goods is borne by the consumer-customer.
    Diesse Srl is not responsible for damage, theft, or loss of returned goods with uninsured shipments. Cash-on-delivery or freight-collect parcels will not be accepted.
     

7. RETURN OF GOODS
The product must be returned to Diesse Srl within 14 days along with the received authorization form.
Subject to any restoration costs for damage to the original packaging, Diesse Srl will refund the full amount paid by the Customer for the product through a credit card refund or bank transfer. In the latter case, the Customer must promptly provide bank account details (IBAN) for the refund.

8. WHEN THE RIGHT OF WITHDRAWAL LAPSES
The right of withdrawal is completely forfeited due to the lack of the essential condition of the product’s integrity (packaging and/or its contents) in cases where Diesse Srl ascertains:

  • Even partial use of the product;
     
  • The absence of the external packaging and/or the original internal packing;
     
  • The absence of integral elements of the product;
     
  • Damage to the product for reasons other than transportation.
     

In the cases mentioned above, Diesse Srl will return the purchased product to the sender, charging the shipping costs to the customer.

Please note: Customers purchasing with a VAT number cannot exercise the right of withdrawal.

11. PROCESSING OF PERSONAL DATA
For the regulation on the processing of personal data by Diesse Srl, please refer to the dedicated section of the website.

 

GENERAL TERMS AND CONDITIONS OF SALE AND WARRANTY FOR EQUIPMENT OF DIESSE SRL

1 – Subject

1.1 These General Terms and Conditions of Sale for Equipment (hereinafter the "General Terms") regulate, unless otherwise expressly agreed in the contract, the terms and conditions of sale of all tools and related accessories supplied with them at the time of sale, produced and marketed by the company DIESSE Srl (hereinafter also referred to as "DIESSE" and/or the "Seller").

1.2 These "General Terms" apply to all equipment supply contracts concluded between DIESSE and the Buyer (hereinafter also the "Customer"), which form an integral and substantive part of these agreements.

1.4 Any exceptions and/or modifications to these "General Terms" shall only be valid and effective if agreed upon in writing by both parties, without prejudice to the applicability of the non-exempted or non-modified sections.

2 – Supply Order and Conclusion of the Contract

2.1 The sales contract shall be deemed concluded upon receipt by Diesse of both the Order Estimate prepared by the Seller, including the price and payment terms, signed by the Customer for acceptance, and the General Terms of the sales contract, also signed for acceptance by the Customer. The Estimate contains a description of the goods and/or accessories purchased. Therefore, all materials and/or accessories described in any advertising brochures of the item being sold but not expressly mentioned in the Order Estimate are excluded.

2.2 If 15 days have elapsed from the sending of the Order Estimate without the Customer’s explicit acceptance as per point 2.1, Diesse shall no longer be bound by the contractual proposal contained in the Order Estimate.

2.3 The technical descriptions accompanying the contractual offer, as well as those contained in catalogs, should be considered merely indicative. DIESSE reserves the right to make any necessary changes, notifying the Buyer, due to technological advancements or to adapt the system or materials offered based on new technical information received by its technical offices after sending the Order Estimate.

3 – Delivery

3.1 The delivery terms, whether measured in months, weeks, working days, or specific calendar dates as indicated in the Order Estimate, are never binding for the Seller and should be considered merely indicative and non-essential.

Under no circumstances shall DIESSE be held liable for any damages, including indirect and/or of any nature, that may arise for the Buyer due to the failure to deliver the goods within the indicated terms. Nor shall any delays in delivery authorize the cancellation or modification of orders or delays in payments by the Buyer.

3.2 Delivery terms shall commence from the date of contract conclusion or any other date mutually agreed upon in writing by the parties. If the Buyer is required to pay part of the price as an advance or provide suitable guarantees for the proper execution of the contract, the delivery terms shall start from the payment of the advance or the issuance of the required guarantees.

3.4 Delivery terms may, in any case, be interrupted or suspended in the following cases:
a) Force majeure and/or unforeseeable circumstances and/or other circumstances not attributable to the intent and/or fault of DIESSE, such as strikes, labor disputes, lockouts, fires, floods, unexpected business difficulties, unforeseen shortages of labor, raw materials, and/or energy;
b) Delays, impediments, or failure in the delivery of materials or machinery by DIESSE’s suppliers for reasons beyond DIESSE’s control;
c) The Buyer’s failure to provide timely necessary instructions and/or failure to complete, within the agreed deadlines, the works under its responsibility and/or failure to deliver in due time any special parts and/or components to be installed on the purchased goods and/or technical or construction specifications deemed essential by DIESSE for the installation and/or assembly of the purchased products;
d) The Buyer’s failure to pay advances, deposits, or, in any case, the agreed amount within the agreed deadlines;
e) Changes made by the Buyer to the supply order, even if accepted by the Seller.

Delivery terms will recommence from the day following the resolution of the cause that led to their suspension or interruption.

From the moment of delivery, all risks, custody, maintenance, and/or insurance costs shall be borne by the Buyer, with no obligation on DIESSE to cover such aspects. Therefore, any risks will be the sole responsibility of the Buyer.

4 – Suspension of Contract Execution

4.1 If, during the execution of the contract, protests, seizures, attachments, and/or, more generally, any prejudicial acts arise against the Buyer that cast doubt on their solvency and the consequent payment of the agreed price, DIESSE may, at its sole discretion, suspend delivery and contract execution pursuant to and for the effects of Article 1461 of the Italian Civil Code until the Buyer provides an adequate guarantee.

4.2 If the Seller intends to exercise the right to suspend contract execution, they shall notify the Buyer in writing via certified email (PEC) or registered letter with return receipt, or any other means that ensures the Buyer is aware of the suspension.

4.4 If the condition for suspension of the contract under Article 4.1 occurs and the Buyer fails to promptly provide an adequate guarantee for the fulfillment of their contractual obligations, such failure will constitute grounds for the Seller to invoke the express termination clause provided for in Article 13.

5 – Custody

5.1 From the date of delivery of the equipment or each individual component, even if delivered on approval or consignment, in cases where delivery occurs at different times, the Buyer assumes full responsibility for the custody of the delivered goods, bearing liability for any damage to property and/or third parties arising in any manner.

5.2 Once the equipment has been delivered, the Buyer is strictly prohibited from using it before the testing operations are carried out. Any failure to comply with this requirement shall result in the forfeiture of all warranty coverage on the machine, without prejudice to the Seller’s right to claim damages.

6 – Packaging

Packaging costs are included in the sale price. Packaging materials will not be accepted for return, and disposal costs shall be borne exclusively by the Buyer.

7 – Warranty and Liability Exclusion

7.1 DIESSE guarantees the proper functioning of the supplied equipment and the absence of material, construction, or assembly defects for a period of twenty-four (24) months from the date of commissioning and testing. The warranty consists solely of free repair and/or replacement, in whole or in part, of components found to be defective due to manufacturing or material faults.

7.2 In any case, for the warranty to be valid, the following conditions must be met: a) The accessories installed on the equipment must be original; b) Preventive maintenance must be performed according to the schedule specified in the manual and by qualified personnel; c) The Customer must be up to date with payment for the purchase price; it is understood that the warranty shall not apply in cases of damage caused by improper use of the supplied equipment.

7.3 To avoid forfeiture of the warranty, the Buyer must report any defects in writing within eight (8) days of their discovery. Replacements and repairs will be carried out by DIESSE or by other companies or technicians selected by DIESSE within the necessary timeframe. Inspections will be carried out by DIESSE’s trusted personnel, whom the Buyer must facilitate in their duties.

7.4 The Customer loses the right to the warranty in the following cases: (1) Failure to comply with the terms and conditions of Article 7.2; (2) If the equipment was used before testing, was not properly maintained, was used improperly, or was modified/disassembled without the Seller’s authorization; (3) If the equipment was tampered with; (4) If the Buyer fails to meet their contractual obligations, particularly regarding payment according to the agreed terms.

7.5 The Seller shall not be held liable for the Buyer’s choice of purchased equipment and shall not be responsible for any consequential damages arising from the selected product.

7.6 The warranty does not cover failures or breakages due to normal wear and tear, negligence, improper maintenance, use of unsuitable lubricants, excessive or inappropriate use of the equipment.

7.7 Corrosion warranty is not provided for use in chemically unstable, salty, thermal, or salt-treated water.

7.8 The manufacturer disclaims any liability for damages resulting from non-compliance with the instructions in the user manual provided with the equipment.

7.9 All warranty interventions are subject to a fixed service call fee. The cost of transporting replacement or repair parts under warranty shall be borne by the Buyer.

7.10 The warranty does not cover damage or malfunctions due to falls, improper use, failure to comply with maintenance rules, or unauthorized interventions.

7.11 The manufacturer disclaims all liability for damages arising from non-compliance with the instructions in the user manual.

7.12 Wearable parts such as seats, pedal straps, rubber feet, suction cups, elastic bands, and AquaJump fabrics are not covered by the warranty. The warranty is valid only when presented together with the purchase invoice.

8 – Complaints and Disputes

8.1 Any complaints or disputes regarding purchased equipment must be communicated to DIESSE by registered letter with return receipt or certified email. Disputes concerning a single equipment supply shall have no effect on the rest of the order or on the payment of other supplies already received and not timely disputed. The Buyer is responsible for checking the supply and reporting any discrepancies or damage within eight (8) days of delivery. After this period, the goods will be considered unconditionally accepted.

8.4 Complaints that do not comply with the specified terms and procedures shall not be considered, and the delivered products shall be deemed fully accepted.

9 – Testing

9.1 Where required, the functional testing of purchased equipment will be carried out by DIESSE personnel according to commissioning procedures. The Buyer is not authorized to use the equipment without a positive test result from DIESSE personnel; any consequences of improper use shall be attributed to the Buyer, resulting in forfeiture of warranty rights and liability for damages.

9.2 If the Buyer unreasonably refuses to sign the positive test report, DIESSE may terminate the contract pursuant to Article 1456 of the Italian Civil Code, requiring the Buyer to return the equipment. Failure to return the equipment or refusal to allow DIESSE personnel to retrieve it shall result in a penalty of €500 per day, without prejudice to further damages.

10 – Technical Support

Any additional service requests beyond the warranty terms shall be regulated by the general service conditions for assistance and spare parts supply.

11 – Prices and Payment Terms

11.1 Prices are in Euros unless otherwise agreed in writing.

11.2 The Buyer agrees to pay the Seller the price of the Products (“Price”) as specified in the Order Estimate or as otherwise agreed between the parties. Any exceptions claimed by the Buyer regarding alleged contractual breaches by DIESSE or product defects shall not entitle the Buyer to withhold or delay payment.

11.3 In case of late payment, interest will be charged according to Article 5 of Legislative Decree 231/2002, starting from the day following the due date, without prejudice to further damages.

12 – Retention of Title

12.1

Pursuant to and for the purposes of Articles 1523 et seq. of the Italian Civil Code, DIESSE Srl retains ownership of the supplied products until full receipt of the agreed payment. The retention of title clause applies both in cases of sales with installment payments and when the payment of the consideration is deferred, in whole or in part, beyond the delivery date.

12.2

The Buyer is obliged to store the goods and ensure their preservation and maintenance in favor of the Seller until the transfer of ownership, which will occur upon full settlement of the agreed price. In particular, the Buyer may not sell, lease, pledge, move, allow the seizure or attachment of the supplied products without declaring the Seller's ownership and without immediately notifying the Seller via registered letter with return receipt or another equivalent communication method, provided that proof of receipt is available.

12.3

DIESSE reserves the right to register the retention of title clause at its own expense pursuant to Article 1524 of the Italian Civil Code.

12.4

In the event of contract termination due to the Buyer's default in the sale of equipment, the installments already paid and/or any amounts already received shall be retained by DIESSE as compensation pursuant to Article 1526, paragraph 2, of the Italian Civil Code, without prejudice to any further damages.

 

13 – Express Termination Clause

The Contract shall be automatically terminated, pursuant to Article 1456 of the Italian Civil Code, by means of a simple written declaration by the Seller of its intention to invoke this express termination clause, in the following cases:

  1. If the situation outlined in Article 4.1 occurs and the Buyer has not promptly provided an adequate guarantee for fulfilling its contractual obligations or has done so belatedly.
     
  2. If the Buyer fails to provide the guarantees agreed upon at the time of contract conclusion or provides them belatedly.
     
  3. If the Buyer is subjected to voluntary liquidation or insolvency proceedings.
     
  4. If the Buyer defaults on the payment of the price, the deposit, or two consecutive agreed installments.
     
  5. If the Buyer unjustifiably signs a positive acceptance report for the machine as provided under Article 9.2.
     

14 – Jurisdiction

For any disputes relating to the interpretation and/or execution of the sales contract, the parties declare the exclusive jurisdiction of the Court of Bologna.

 

15 – Governing Law and Jurisdiction

The Contract is exclusively governed by Italian law, expressly excluding the application of the United Nations Convention on Contracts for the International Sale of Goods.